![]() This seam finish not only prevents unraveling or fraying, but makes the seam very strong. And, here is what it looks like on the inside.Note: today we continue our occasional series of seam finishing tutorials written by April Henry.Ī flat-felled seam is accomplished by sewing two lines of stitching at the seam while simultaneously enclosing the raw edges of the fabric.This is all there is to it! Here is the finished flat felled seam on the outside.This secures the folded edge and gives the double line of stitching featured in the flat felled seam. Using your topstitch foot, move your needle two positions to the left and begin topstitching, lining the bar with the folded edge. As you can see, we are looking at the right side of the fabric and see the first stitching line near the line of pins. I do this by just folding with my fingers. This is what will make your seam and stitching even for the finished flat felled seam. Gently pull the fabric around to keep it even and tucked in nicely behind the smaller seam allowance. Next, fold the larger seam allowance over the 1/4-inch seam allowance, enclosing it in the fabric. ![]() Here I've lined up my quilters ruler to be able to leave a 1/4-inch seam allowance. If it is a side seam (like this example), you'll want to trim the side towards the back of the garment so that it is a smoother look from the front. ![]() The one that you trim will be bulkier on that side of the finished seam. Next, you will trim one of the seam allowances to 1/4-inch. It is recommended to have at least 1/2-inch seam allowance, preferably 5/8-inch seam allowance. Place your two pieces of fabric WRONG sides together and stitch with your seam allowance. This method is not suitable for curvy sewing lines like putting in a sleeve or a collar. The seam lines for a flat felled technique should be straight seams. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |